Bellow is my understanding, would you review and correct me where needed?
1. Max Radius Between Deliveries - if this parameter is set at value X (for e.g) than distance between any deliveries can not exceed this value. For example if Shipment Stops are 1(P) - 2(D1) - 3(D2) - 4 (D3), where P = Pickup and D=Delivery than distance between D1-D2, and D1-D3, D2-D3 etc. can not exceed this value (X). Am I interpreting OTM help correct way? if not what is the correct interpretation of this Parameter
2. Max Radius Percentage for Deliveries - my understanding is if this values is set to X% than in above example distance from D1 to D3 divided by Distance from P to D3 can not exceed this percentage value and that would be repeated for each deliveries. Am I interpreting OTM help correct way? if not what is the correct interpretation of this Parameter
3. There is any parameter in OTM where we can limit total distance either between 1st Pickup to Last Delivery or between 1st Delivery and Last Delivery?
4. Also OTM help describes following parameters can be set at Itinerary as well as Multistop Logic config level, but when Itinerary values for these parameters are null than OTM Planning process does not use Multi-Stop logic config values. We do not plan Order Movements, we only Plan order release. So in our case Itinerary should be available during planning process, but we have set values at Multi-Stop Logic Config level, I am wondering if those are getting utilized during planning process or not?
Parameters:
MULTISTOP MAX DISTANCE BETWEEN DELIVERIES
MULTISTOP MAX DISTANCE BETWEEN PICKUPS
MULTISTOP MAX RADIUS FOR DELIVERIES
MULTISTOP MAX RADIUS FOR PICKUPS
MULTISTOP MAX RADIUS PERCENTAGE FOR DELIVERIES
MULTISTOP MAX RADIUS PERCENTAGE FOR PICKUPS
OTM Help = "An itinerary has fields that correspond to these parameters (Max Distance Between Pickups, Max Distance Between Deliveries, Max Radius Between Pickups, Max Radius Between Deliveries, Max Radius Percent For Pickups, Max Radius Percent For Deliveries). If an itinerary is not available for use within the multistop logic (as is the case when order movements are being planned), the values from these parameters will be used instead. If an itinerary is available but a field on the itinerary is not populated, that parameter will not be defaulted using the multistop logic configuration parameter. The constraint for that parameter will be ignored, or defaulted to a very large (unconstraining) value."
1. Max Radius Between Deliveries - if this parameter is set at value X (for e.g) than distance between any deliveries can not exceed this value. For example if Shipment Stops are 1(P) - 2(D1) - 3(D2) - 4 (D3), where P = Pickup and D=Delivery than distance between D1-D2, and D1-D3, D2-D3 etc. can not exceed this value (X). Am I interpreting OTM help correct way? if not what is the correct interpretation of this Parameter
2. Max Radius Percentage for Deliveries - my understanding is if this values is set to X% than in above example distance from D1 to D3 divided by Distance from P to D3 can not exceed this percentage value and that would be repeated for each deliveries. Am I interpreting OTM help correct way? if not what is the correct interpretation of this Parameter
3. There is any parameter in OTM where we can limit total distance either between 1st Pickup to Last Delivery or between 1st Delivery and Last Delivery?
4. Also OTM help describes following parameters can be set at Itinerary as well as Multistop Logic config level, but when Itinerary values for these parameters are null than OTM Planning process does not use Multi-Stop logic config values. We do not plan Order Movements, we only Plan order release. So in our case Itinerary should be available during planning process, but we have set values at Multi-Stop Logic Config level, I am wondering if those are getting utilized during planning process or not?
Parameters:
MULTISTOP MAX DISTANCE BETWEEN DELIVERIES
MULTISTOP MAX DISTANCE BETWEEN PICKUPS
MULTISTOP MAX RADIUS FOR DELIVERIES
MULTISTOP MAX RADIUS FOR PICKUPS
MULTISTOP MAX RADIUS PERCENTAGE FOR DELIVERIES
MULTISTOP MAX RADIUS PERCENTAGE FOR PICKUPS
OTM Help = "An itinerary has fields that correspond to these parameters (Max Distance Between Pickups, Max Distance Between Deliveries, Max Radius Between Pickups, Max Radius Between Deliveries, Max Radius Percent For Pickups, Max Radius Percent For Deliveries). If an itinerary is not available for use within the multistop logic (as is the case when order movements are being planned), the values from these parameters will be used instead. If an itinerary is available but a field on the itinerary is not populated, that parameter will not be defaulted using the multistop logic configuration parameter. The constraint for that parameter will be ignored, or defaulted to a very large (unconstraining) value."